Injectech Home
About Services Technical Sales Contact Support

Luers - Female Slip Luers

Features & Benefits:
Single barb design
-->The single barb does not have a parting line on the sealing surface thereby minimizing leak potential.
-->The barb and stem allow the tubing to relax providing a better grip on the tubing.
-->The barbs have been designed for easy assembly without compromising pressure or tensile strength.
100% virgin materials traced to lot numbers
-->Our luers are molded with 100% virgin materials allowing for contamination-free parts that are in stock.
-->Material certification is available upon request.
Tool Design
-->Our tools have been designed to offer flexibility. This allows for changes to be made easily should you need a custom configuration.
 
Contact Sales@injectech.us for assembly quotes.
 Luer, Slip to 1/16" (1.5mm) ID Tubing
images/ProductImages/Luers/02116.jpg
Part Number
01116-URE00-003
01116-RSPC01-001
01116-ABS00-001
Material
Urethane
Lipid Resistant, Rad. Stable PC
ABS
 Luer, Slip to 3/32" (2.25mm) ID Tubing
images/ProductImages/Luers/02332.jpg
Part Number
01332-URE00-003
01332-RSPC01-001
01332-ABS00-001
Material
Urethane
Lipid Resistant, Rad. Stable PC
ABS
 Luer, Slip to 1/8" (3mm) ID Tubing
images/ProductImages/Luers/0218.jpg
Part Number
0118-URE00-003
0118-RSPC01-001
0118-ABS00-001
Material
Urethane
Lipid Resistant, Rad. Stable PC
ABS

Injectech, LLC | 307 North Link Lane | Fort Collins, Colorado 80524 USA | 970-482-0273 | Fax: 970-482-0283
Products | Services | Technical Info | Support | Sales | About Us | Contact

Copyright © 2007 Injectech, LLC. All rights reserved